Showing 1–16 of 71 results
Model:
269006
Description:
Single Pole, Single Throw, Normally Open power contactor (relay). For use when adding remote control (such as Applied Wireless RCR303C-3R Series Remote Control Receiver) to switch a device’s AC power line On and Off. Switching contacts rated at 25 Amps. 24VAC coil (requires appropriate power transformer, such as Applied Wireless 610300). Open frame (rated for indoor use).
Includes:
Contactor
Model:
600279-L200E-xx
Description:
Low-Loss Antenna Extension cable is used when mounting SF900 or RCR24SS products in an enclosure where the antenna needs to be mounted outside the enclosure, or otherwise extending the antenna mounting position. RPSMA M to RPSMA F Bulkhead low loss coax assembly. 50-Ohms impedance. Other lengths are available.
Includes:
Cable Assembly, Bulkhead Washer and Nut.
Model:
800279-8
Description:
Antenna extension cable is used when mounting SF900 or RCR24SS products in an enclosure where the antenna needs to be mounted outside the enclosure.
Includes:
Cable Assembly
Model:
610300
Description:
AC Power Transformer, 120VAC-to-24VAC, 20VA, for use with devices requiring 24VAC.
Includes:
Transformer
Model:
610442
Description:
AC Power Adapter, 12VDC, 500mA, 2.1mm Connector.
120 to 240VAC Input.
Includes:
Power Supply
Model:
610442-SAT
Description:
AC Power Adapter, 12VDC, 500mA, Strip & Tinned Leads
Includes:
Power Supply
Model:
800135
Description:
Antenna, Whip, 1/4Wave helical, 520-550MHz
Includes:
Antenna
Model:
800135F-xxx
Description:
Antenna, Whip, 1/4Wave, BNC, Straight
Includes:
Antenna
Model:
800136-SW
Description:
Antenna, Whip, 1/2-Wave, Swivel, 902-928MHz
Includes:
Antenna
Model:
800137-ST
Description:
Antenna, Whip, 1/4Wave, 433MHz, RPSMA
Includes:
Antenna
Model:
800253A-3
Description:
Antenna, Rubber Duck, 3-dBi Gain, 2450 MHz, Swivel
Includes:
Antenna.
Model:
800253A-5
Description:
Antenna, Rubber Duck, 5-dBi Gain, 2450 MHz, Swivel, 190 mm
Used on RCR24SS3R, RCR24SSA-6R
Includes:
Antenna.
Model:
800253A-5 Upgrade
Description:
Antenna, Rubber Duck, 5-dBi Gain, 2450 MHz, Swivel, 190 mm
Used on RCR24SS3R, RCR24SSA-6R
Upgrade from the standard 3-dB antenna included with the RCR24SS receivers to this 5-dB model for longer range.
Includes:
Antenna.
Model:
FB35T900
Description:
Antenna, Brass Blade Base station, Steel Whip Antenna, 7.1 dBi Gain, 890-960 MHz, 32 inches
Includes:
Base Station, Antenna, Male N / Female BNC adapter, 5 inch Mounting Bracket, Hose Clamps
Model:
AT900-24DZ
Description:
The AT900-24D can be used with the Applied Wireless Pro Audio receiver. It is used when a remotely mounted transmit antenna is desired. Range is approximately 750 feet*. The AT900-24D transmits excellent quality audio from any line level source. 24-Channels are available to enable operation of multiple units with different programming in an area. One transmitter may transmit to multiple receivers with no delay.
The Remote Antenna, connected via CAT5 cable of any length to the transmitter unit, may be located to better enable signal propagation. A remote Indoor Antenna version is available as well.
* Line-of-Sight, when used with PAR900M receiver with included antennas. Greater range can be achieved using optional directional antennas such as the FP915-5 Flat Panel Antenna or Y915-10 Yagi Antenna. Expect reduced range for non-Line-of-Sight conditions.
Includes:
Transmitter Controller, Outdoor Antenna, Pole Mount Bracket, AC Power Adapter, 7′ CAT5 Cable, User’s Guide
Model:
CA639PA
Description:
Attache Case for Pro Audio products, Metal hinges, Nylon slide clasps. Foam cutouts for PAR900M, PAT900, power supplies and omni antennas.
Includes:
Case, foam inserts.
