Showing 17–32 of 71 results

  • Attache Case, Std Audio

    $39.95

    Model:
    CA639SA
    Description:
    Attache Case for Pro Audio products, Metal hinges, Nylon slide clasps.
    Includes:
    Case, foam inserts.

    Add to cartDone

  • AVR900-3 3-CH Video Receiver

    $339.95

    Model:
    AVR900-3
    Description:
    Designed for long-range* wireless audio/video applications under Part 15 of the FCC Regulations. The AVR900-3 delivers excellent B/W and color video quality as well as full-range monaural audio. The Receiver incorporates ceramic front-end filters, IF SAW filters for excellent selectivity and low noise front end. Three channel frequencies are screwdiver selectable from the front panel. Use with AVT900-3 transmitter.

    *Unobstructed line of sight outdoor range is typically 500 ft, when used with AVT900-3A transmitter and included omni-directional antennas. Longer range can be achieved with a directional receiver antenna such as a flat panel or Yagi. Higher power transmitters (AVT900-3B and AVT9003C) are available only for military or law enforcement applications.
    Includes:
    Receiver, antenna (800136), AC power adaptor, video cable, audio cable, User’s Guide

    Read moreDone

  • AVT900-3 3-CH Video Transmitter

    $339.95

    Model:
    AVT900-3A
    Description:
    The AVT900-3 is available in two versions; the AVT900-3A conforms to FCC Part 15 requirements for unlicensed use and has a range up to approximately 500 feet*. Model AVT900-3B has higher power output and may only be used for law enforcement or military applications. It has a range up to approximately 3000 feet*. The AVT900-3 provides excellent B/W and color video quality as well as full-range monaural audio (audio is transmitted as a 4.5MHz FM subcarrier). Three channel frequencies are screwdriver selectable from the front panel. Use with AVR900-3 receiver.
    *Unobstructed line of sight outdoor range is typically 500 ft, when used with AVR900-3 receiver and included omni-directional antenna. Longer range can be achieved with a directional receiver antenna such as a flat panel or Yagi.
    Includes:
    Transmitter, antenna (800125-ST), AC power adaptor, video cable, audio cable, User’s Guide

    Read moreDone

  • DP300A, Dipole Antenna, 303-315MHz, with 7-ft coax cable

    $20.95

    Model:
    DP300A
    Description:
    Dipole, 303-315MHz, 7′ cable w/RCA Phono Plug
    Expected range is up to 600 feet (Line-of-sight).
    Non line-of-sight applications will be less depending on nature of obstruction(s), such as trees, wall construction, fence material etc.
    Includes:
    Antenna with cable

    Add to cartDone

  • DP400A, Dipole Antenna, 418-434 MHz, with 7-ft Cable

    $20.95

    Model:
    DP400A
    Description:
    Dipole, 418-434MHz, 7′ cable w/RCA Phono Plug
    Expected range is up to 600 feet (Line-of-sight).
    Non line-of-sight applications will be less depending on nature of obstruction(s), such as trees, wall construction, fence material etc.
    Includes:
    Antenna with cable

    Add to cartDone

  • FP915-5, Antenna, Flat Panel, 902-928MHz

    $99.95

    Model:
    FP915-5
    Description:
    Antenna, Flat Panel, 902-928MHz, 5.5dB Gain
    Includes:
    Antenna, Mounting Hardware

    Add to cartDone

  • HTXW24SSA6 Handheld, Watertight, High EMI, Remote Control Transmitter

    $74.95

    Model:
    HTXW24SSA6
    Description:
    The handheld-style remote control transmitters in the HTXW24SSA6 series are a cost effective solution to wireless remote control system design and implementation. The transmitter’s ID code is preprogrammed at the factory to one of more than 4 billion possible codes, providing a very high degree of security. Spread spectrum technology enables this product to be used in high EMI applications, i.e. near electric motors with brushes, and these remotes will not interfere with wifi systems. Power is supplied by a widely available 3-Volt coin cell battery (included). Available in up to 6-buttons. Use with RCR24SSA Series receivers. These receivers can learn up to 60 different transmitter ID codes.  Call factory for customized overlay details.

    Select optionsDone

  • KTX C-Series Keyfob Remote Transmitter

    $29.95

    Model:
    KTX433C
    Description:
    The KTX C-series of keyfob remote data transmitters are FCC Part 15 certified which allows for a quick and cost effective solution to wireless remote control system design and production. The KTX C-Series transmitters are SAW resonator stabilized and compatible with both superhet and regenerative receivers. The remote data transmitter’s ID code is factory pre-programmed from more than 16.7 million possible codes, providing a very high degree of security. Power is supplied by a widely available 23A alkaline battery (included). The ABS transmitter enclosures are very rugged and will provide long term reliability and service.
    Includes:
    Transmitter, 23A battery

    Select optionsDone

  • KTX24SSn Keyfob, High EMI, Remote Control Transmitter

    $41.95

    Model:
    KTX24SSn
    Description:
    The keyfob-style remote control transmitters in the KTX24SS Series are a cost effective solution to wireless remote control system design and implementation. The transmitter’s ID code is preprogrammed at the factory to one of more than 4 billion possible codes, providing a very high degree of security. Spread spectrum technology enables this product to be used in high EMI applications, i.e. near electric motors with brushes, and these remotes will not interfere with wifi systems. Power is supplied by a widely available 3-Volt coin cell battery (included). Available in 1, 2 or 3 buttons. Use with RCR24SS Series receivers. These receivers can learn up to 60 different transmitter ID codes.

    Select optionsDone

  • KTXW C-Series Handheld Watertight Remote Transmitter

    $54.95

    Model:
    KTXW303C6
    Description:
    The KTXW C-series handheld remote control transmitters are FCC Part 15 certified which allows for a quick and cost effective solution to wireless remote control system design and production. The KTXW C-Series remote data transmitters are SAW resonator stabilized and compatible with both superhet and regenerative receivers. The remote data transmitter’s ID code is factory pre-programmed from more than 16.7 million possible codes, providing a very high degree of security. Power is supplied by 2 commonly available 3-volt lithium coin cell batteries (included). The ABS transmitter enclosures are very highly water resistant and rugged, to provide long term reliability and service.
    Use with RCR303C6R receiver for up to 6-button operation, or either RCR303C6R or RCR303C3R for up to 3-button operation.
    Includes:
    Transmitter, batteries

    Select optionsDone

  • KTXW24SS3 Keyfob, Watertight, High EMI Remote Control Transmitter

    $41.95

    Model:
    KTXW24SS3
    Description:
    This watertight keyfob-style remote control transmitter in the KTX24SS Series is a cost effective solution to wireless remote control system design and implementation. The transmitter’s ID code is preprogrammed at the factory to one of more than 4 billion possible codes, providing a very high degree of security. Spread spectrum technology enables this product to be used in high EMI applications, i.e. near electric motors with brushes, and these remotes will not interfere with wifi systems. Power is supplied by a widely available coin cell battery (included).  Use with RCR24SS Series receivers. These receivers can learn up to 60 different transmitter ID codes.

    Add to cartDone

  • KTXW24SS6-n Handheld, Watertight, High EMI, Remote Control Transmitter

    $62.95

    Model:
    KTXW24SS6-n
    Description:
    The handheld-style remote control transmitters in the KTXW24SS6 series are a cost effective solution to wireless remote control system design and implementation. The transmitter’s ID code is preprogrammed at the factory to one of more than 4 billion possible codes, providing a very high degree of security. Spread spectrum technology enables this product to be used in high EMI applications, i.e. near electric motors with brushes, and these remotes will not interfere with wifi systems. Power is supplied by a widely available 3-Volt coin cell battery (included). Available in up to 3-buttons. Use with RCR24SS Series receivers. These receivers can learn up to 60 different transmitter ID codes.

    Select optionsDone

  • KTXW24SSA12 12-Button Remote Transmitter, 2.4 GHz

    $99.95

    Model:
    KTXW24SSA12
    Description:
    The KTXW24SSA-series handheld remote control transmitters are a cost effective solution to wireless remote control system design and implementation. The transmitter’s ID code is preprogrammed at the factory to one of more than 4 billion possible codes, providing a very high degree of security. Frequency hopping spread spectrum technology enables this product to be used in high EMI applications, i.e. near electric motors with brushes, and these remotes will not interfere with wifi systems. Power is supplied by two AA batteries(included). Use with two or more RCR24SSA-6 receivers.
    These receivers can learn up to 60 different transmitter ID codes.
    Includes:
    Transmitter, batteries

    Read moreDone

  • KTXW24SSA6-n Handheld, Watertight, High EMI, Remote Control Transmitter

    $75.95

    Model:
    KTXW24SSA6-n
    Description:
    The handheld-style remote control transmitters in the KTXW24SSA6 series are a cost effective solution to wireless remote control system design and implementation. The transmitter’s ID code is preprogrammed at the factory to one of more than 4 billion possible codes, providing a very high degree of security. Spread spectrum technology enables this product to be used in high EMI applications, i.e. near electric motors with brushes, and these remotes will not interfere with wifi systems. Power is supplied by a widely available 3-Volt coin cell battery (included). Available in up to 6-buttons. Use with RCR24SSA Series receivers. These receivers can learn up to 60 different transmitter ID codes.

    Select optionsDone

  • NTX24SS NEMA Box, High EMI, Remote Control Transmitter

    $156.95 – $188.95

    Model:
    NTX24SS2
    Description:
    The NTX24SS series NEMA box remote control transmitters are FCC Part 15 certified which allows for a quick and cost effective solution to wireless remote control system design and production. Spread spectrum technology enables this product to be used in high EMI applications, i.e. near electric motors with brushes, and these remotes will not interfere with wifi systems. Power is supplied by a widely available battery (included).  Use with RCR24SS Series receivers. These receivers can learn up to 60 different transmitter ID codes. The polycarbonate, watertight, transmitter enclosures are very rugged and will provide long term reliability and service.  Available in 1 or 2 buttons.  Other button colors available.
    Includes:
    Transmitter, 12V Battery

    Select optionsDone

  • NTX433 NEMA Box Remote Control Transmitter

    $146.96 – $179.95

    Model:
    NTX433C2
    Description:
    The NTX C-series NEMA remote control transmitters are FCC Part 15 certified which allows for a quick and cost effective solution to wireless remote control system design and production.  The remote transmitter’s ID code is factory preprogrammed from more than 16.7 million possible codes, providing a very high degree of security. Power is supplied by a widely available 12-volt alkaline battery (included). The polycarbonate watertight transmitter enclosures are very rugged and will provide long term reliability and service.  Other button colors available.  Use with Applied Wireless RCR433C series receivers.
    Includes:
    Transmitter, 12V Battery

    Select optionsDone