Showing 33–48 of 71 results
-
$399.95Model:
PAR900M
Description:
The PAR900M dual diversity receiver delivers excellent quality, low noise, line level, monaural wireless audio for amplified speaker applications. 24-Channels are available to enable operation of multiple units in a common area. Use with PAT900 desktop or AT900-24Dx remote antenna transmitters. Multiple receivers may be used with a single transmitter. For longer range, use one or two high gain antennas such as FP915-5 flat panel antenna or Y915-8,-10 or-12 dB Yagi antennas.
Includes:
Receiver, two 1/2-wave antennas, AC power adapter and User’s Guide.
-
$319.95Model:
PAT900
Description:
The PAT900 transmits excellent quality monoaural audio from any line-level source. 24-Channels are available to enable operation of multiple audio sources in a common area. Use with PAR900M dual diversity receiver. Multiple receivers may be used with a single transmitter. The PAR900M/PAT900 wireless system are for use in amplified speaker applications.
Includes:
Transmitter with integrated antenna AC power adapter and User’s Guide.
-
$169.00Model:
R900AV-3
Description:
Module, Receive, FM, Audio/Video, 3-channel, 902-928MHz
-
$145.00Model:
R900V-3
Description:
Module, Receive, FM Modulation, Video, 3-channel, 902-928MHz
-
$45.00Model:
R900V-908
Description:
Module, Receive, FM, Video/Data, 907.8MHz
Includes:
Module
-
$45.00Model:
R900V-922
Description:
Module, Receive, FM, Video/Data, 922.0MHz
-
$146.95Model:
RCR24SS3R
Description:
The RCR24SS Series remote control receivers are designed to provide a quick and cost effective solution for a variety of wireless remote control relay applications. The receiver includes an external antenna, decoder and three 10-Amp on-board relays. The receiver utilizes spread spectrum technology and offers excellent electromagnetic interference (EMI) tolerance, often found in AC and DC motor applications. Units are designed to work with Applied Wireless 2400 MHz transmitters. These products will not interfere with or be affected by Wifi systems. This is a learning receiver, and can learn up to 60 different transmitters.
Includes:
Receiver, 3-dBi Rubber Duck Antenna (800253A-3)
-
$209.95Model:
RCR24SS3R
Description:
The RCR24SS Series remote control receivers are designed to provide a quick and cost effective solution for a variety of wireless remote control relay applications. The receiver includes an external antenna, decoder and three 10-Amp on-board relays. The receiver utilizes spread spectrum technology and offers excellent electromagnetic interference (EMI) tolerance, often found in AC and DC motor applications. Units are designed to work with Applied Wireless 2400 MHz transmitters. These products will not interfere with or be affected by Wifi systems. This is a learning receiver, and can learn up to 60 different transmitters.
Includes:
Receiver, 3-dBi Rubber Duck Antenna (800253A-3)
-
$179.95Model:
RCR24SSA-6R
Description:
The RCR24SSA Series remote control receivers are designed to provide a quick and cost effective solution for a variety of wireless remote control relay applications. The receiver includes an external antenna, decoder and six 10-Amp on-board relays. The receiver utilizes spread spectrum technology and offers excellent electromagnetic interference (EMI) tolerance, often found in AC and DC motor applications. Units are designed to work with Applied Wireless KTX24SSA series 2400 MHz transmitters. These products will not interfere with or be affected by Wifi systems. This is a learning receiver, and can learn up to 60 different transmitters.
Includes:
Receiver, 800253A-3 1/4-wave 3-dBi whip antenna
-
$231.95Model:
RCR24SSA-6R
Description:
The NEMA-4X version of the RCR24SSA Series remote control receivers are designed to provide a quick and cost effective solution for a variety of wireless remote control relay applications. The receiver includes an external antenna, decoder and six 10-Amp on-board relays. The receiver utilizes spread spectrum technology and offers excellent electromagnetic interference (EMI) tolerance, often found in AC and DC motor applications. Units are designed to work with Applied Wireless KTX24SSA series 2400 MHz transmitters. These products will not interfere with or be affected by Wifi systems. This is a learning receiver, and can learn up to 60 different transmitters.
Includes:
Receiver, 800253A-3 1/4-wave 3-dBi whip antenna
-
$179.95Model:
RCR303C-6R
Description:
The RCRC-6R is a remote control receiver designed to provide a quick and cost effective solution for a variety of wireless applications. The receiver includes an external antenna, decoder and six 10A SPDT relays. The relays are individually configurable for Momentary, Toggled, or Latched operation. The receiver offers excellent sensitivity and selectivity by its utilization of SAW technology and state–of-the-art low noise amplifiers. An external jack is provided for an external long-range antenna. Applied Wireless’ proprietary C-Code protocol provides a very high degree of security, with more than 16 million transmitter ID codes. Units are designed to work with Applied Wireless KTXW C-Series handheld remote control transmitters. This is a learning receiver, and can learn up to 4 different factory-coded transmitters. Alternatively, a single “house” address code can be used for applications needing many transmitters operating one receiver.
Includes:
Receiver, plug-in whip antenna
-
$142.95Model:
RCR433C3R
Description:
The RCR C-series remote control receiver is designed to provide a quick and cost effective solution for a variety of wireless applications. The receiver includes an external antenna, decoder and 10A-relay outputs. The receiver offers excellent sensitivity and selectivity by its utilization of SAW technology and state-of-the-art low noise amplifiers. An external jack is provided for external long-range antenna. Applied Wireless’ proprietary C-Code protocol provides a very high degree of security, with more than 16 million transmitter ID codes. Units are designed to work with Applied Wireless KTX and KTXW C-series remote control transmitters. This is a “learning” receiver, and can learn up to four different factory-coded transmitters. For applications using many remote transmitters, a unique “house” code can be assigned to all the transmitter remotes.
Includes:
Receiver, plug-in whip antenna
-
$27.95Model:
RX303AT
Description:
Module, Receive, OOK, Data, 303.825MHz
-
$27.95Model:
RX433AT
Description:
Module, Receive, OOK, Data, 433.92MHz
-
$217.95 – $271.95Model:
SF900C
Description:
The SF Series products are a two-way system designed to provide a quick and cost effective solution for a variety of wireless switching applications. The SF Series remote control transceiver can be used as long range (2mi.) remote control wireless relays or as a switch “follower”, relays that will “follow” the actions of a single or multiple remote switches.
Each SF900C has up to 8-inputs connected to a transmitter and 8-outputs controlled by a receiver. Designed to work in pairs, the output relay at the “receive” end of the wireless link will “follow” the input at the “transmit” end of the other unit. An optional “loopback” mode can be set for each channel separately. This will activate the corresponding relay at the TRANSMIT end confirming that the switch change was carried out at the other end.
The inputs are opto-isolated and may be operated by an applied voltage that can be supplied by a power source from 5 to 24 Volts AC or DC through a switch contact, relay, sensor, PLC output etc.
Alternatively, instead of automatic switch following operation, the SF900 can operate as an up to 8-channel wireless relay using a SFT900C-8 eight-button handheld remote. In this configuration, latched, momentary or toggle mode outputs are available. When a button is pushed on the SFT900C-8, an RX light will indicate that the proper relay was triggered in the SF900C. Multiple transmitters will work with a single SF900C Base unit. Handheld remote range is 1-mile and up depending on the configuration.
These products utilize frequency hopping spread spectrum technology and are immune to interference and multi-path fading. All inputs and outputs are independently isolated from each other and from power supply ground. They will not cause interference with wi-fi networks. Also available in outdoor NEMA IP-67 enclosure.
Includes:
SF900 Transceiver unit, antenna, User’s Manual
-
$217.95 – $249.95Model:
SF900C-B-R
Description:
This receiver, when used with SF900C-B-B series transmitter, creates a two-way system designed to provide a quick and cost-effective solution for a variety of wireless switching applications. The SF voltage input “switch following” transmitter can be used for long range (3-mi.) wireless control of relays. As a switch “follower”, the receiver remote relays will “follow” the actions of a single or multiple remote input switches.
Each SF900C system has up to 8-inputs connected to a transmitter which controls 8-outputs at the receiver. Designed to work in either pairs or one transmitter to several receivers, the output relay at the “receive” end of the wireless link will “follow” the input at the “transmit” end of the other unit. An optional “loopback” mode can be set for each channel separately. This will activate the corresponding relay at the TRANSMITTER end confirming that the switch change was carried out at the receiver end.
These products utilize frequency hopping spread spectrum technology and are immune to interference and multi-path fading. They will not cause interference with wi-fi networks. Also available in outdoor NEMA IP-65 enclosure.
Switch Follower Receiver, High EMI
Includes:
SF900 Receiver and antenna
