Showing 17–22 of 22 results

  • SF900C “Switch Follower” Remote Control and Voltage Input Transceiver, Long Range

    $217.95$271.95

    Model:
    SF900C
    Description:
    The SF Series products are a two-way system designed to provide a quick and cost effective solution for a variety of wireless switching applications. The SF Series remote control transceiver can be used as long range (2mi.) remote control wireless relays or as a switch “follower”, relays that will “follow” the actions of a single or multiple remote switches.

    Each SF900C has up to 8-inputs connected to a transmitter and 8-outputs controlled by a receiver. Designed to work in pairs, the output relay at the “receive” end of the wireless link will “follow” the input at the “transmit” end of the other unit. An optional “loopback” mode can be set for each channel separately. This will activate the corresponding relay at the TRANSMIT end confirming that the switch change was carried out at the other end.

    The inputs are opto-isolated and may be operated by an applied voltage that can be supplied by a power source from 5 to 24 Volts AC or DC through a switch contact, relay, sensor, PLC output etc.
    Alternatively, instead of automatic switch following operation, the SF900 can operate as an up to 8-channel wireless relay using a SFT900C-8 eight-button handheld remote. In this configuration, latched, momentary or toggle mode outputs are available. When a button is pushed on the SFT900C-8, an RX light will indicate that the proper relay was triggered in the SF900C. Multiple transmitters will work with a single SF900C Base unit. Handheld remote range is 1-mile and up depending on the configuration.

    These products utilize frequency hopping spread spectrum technology and are immune to interference and multi-path fading. All inputs and outputs are independently isolated from each other and from power supply ground.  They will not cause interference with wi-fi networks.  Also available in outdoor NEMA IP-67 enclosure.

    Includes:
    SF900 Transceiver unit, antenna, User’s Manual

  • SF900C-OPT14 “Switch Follower” Remote Control and Voltage Input Transceiver, NEMA 4X Enclosure

    $274.95$324.95

    Model:
    SF900C
    Description:
    Outdoor version of SF900. Enclosed in NEMA-4 watertight enclosure with external antenna and power/control cable gland.
    The SF Series products are a two-way system designed to provide a quick and cost effective solution for a variety of wireless switching applications. The SF Series remote control transceiver can be used as long range remote control wireless relays or as a switch “follower”, relays that will “follow” the actions of a single or multiple remote switches.
    Each SF900C has up to 8-inputs connected to a transmitter and 8-outputs controlled by a receiver. Designed to work in pairs, the output relay at the “receive” end of the wireless link will “follow” the input at the “transmit” end of the other unit. An optional “loopback” mode can be set for each channel separately. This will activate the corresponding relay at the TRANSMIT end confirming that the switch change was carried out at the other end.
    The inputs are opto-isolated and may be operated by an applied voltage that can be supplied by a power source from 5 to 24 Volts AC or DC through a switch contact, relay, sensor, PLC output etc.
    Alternatively, instead of automatic switch following operation, the SF900 can operate as an up to 8-channel wireless relay using a SFT900C-8 eight-button handheld remote. In this configuration, latched, momentary or toggle mode outputs are available. When a button is pushed on the SFT900C-8, an RX light will indicate that the proper relay was triggered in the SF900C. Multiple transmitters will work with a single SF900C Base unit. Handheld remote range is 1/2-mile and up depending on the configuration.
    These products utilize frequency hopping spread spectrum technology and are immune to interference and multi-path fading. All inputs and outputs are independently isolated from each other and from power supply ground.  They will not cause interference with wi-fi networks.
    Includes:
    SF900 Transceiver unit, antenna, User’s Manual, – PS includes internal 120/240 power supply.

  • SF900C-RX Remote Control Receiver, Long Range

    $217.95$271.95

    Model:
    SF900C-RX
    Description:
    The SF900C-RX receivers, when used with SFT900C handheld transmitters, are designed to provide a quick and cost effective solution for a variety of wireless switching applications with range of up to 2+ miles.

    The SF900C-RX receiver operates as a multi-channel, up to 10 wireless relays using a SFT900C handheld or wall mount remote control. The default channel mode is Momentary but with optional custom software, Latched and Toggle modes are available applications. Mixed modes can also be programmed. When a button is pushed on the SFT900C transmitter, an RX LED and audible tone will indicate that the proper relay was triggered after receiving a verified acknowledgment reply back from the SF900C-RX receiver. Multiple transmitters can be used with one receiver as well as one transmitter can operate multiple receivers.

    For wireless remote applications with voltage input triggers (external switches, dry contacts, PLC activation, etc.) use SF900C-B-B transmitters and SF900C-B-R receivers for up to 3-mile range.

    These products utilize frequency hopping spread spectrum technology and are resistant to interference and multi-path fading. They will not cause interference with wi-fi networks. Also available in outdoor NEMA IP-67 enclosure and with 120/240V internal power supply options.

    Includes:
    SF900-RX Receiver & Antenna

  • SF900C-RX-OPT14 Remote Control Receiver, Long Range, 900MHz, Outdoor Enclosure

    $274.95$349.95

    Model:
    SF900C-RX-OPT14
    Description:
    The SF900C-RX receivers, when used with SFT900C handheld transmitters, are designed to provide a quick and cost effective solution for a variety of wireless switching applications with range of up to 2+ miles.

    The SF900C-RX receiver operates as a multi-channel, up to 10 wireless relays using a SFT900C handheld or wall mount remote control. The default channel mode is Momentary but with optional custom software, Latched and Toggle modes are available applications. Mixed modes can also be programmed. When a button is pushed on the SFT900C transmitter, an RX LED and audible tone will indicate that the proper relay was triggered after receiving a verified acknowledgment reply back from the SF900C-RX receiver. Multiple transmitters can be used with one receiver as well as one transmitter can operate multiple receivers.

    For wireless remote applications with voltage input triggers (external switches, dry contacts, PLC activation, etc.) use SF900C-B-B transmitters and SF900C-B-R receivers for up to 3-mile range.

    These products utilize frequency hopping spread spectrum technology and are resistant to interference and multi-path fading. They will not cause interference with wi-fi networks. Also available in outdoor NEMA IP-67 enclosure and with 120/240V internal power supply options.

    Includes:
    SF900-RX Receiver & Antenna. -PS version includes 120/240V Power Supply.

  • SFT900A Remote Control Transmitter, Handheld, 900 MHz

    $169.95

    Model:
    SFT900A-4
    Description:
    The SFT900 series transmitters are FCC Part 15 certified, allowing for quick and cost effective wireless solutions. The transmitter ID is preprogramed to one of more than 8 million possible codes at the factory, providing a very high degree of security. The transmitters’ ABS housing is watertight and very rugged and provides long term reliability. SF900 devices utilize spread spectrum technology, granting them long range, high preformance, and freedom from most interferance. Power is supplied by a CR123A lithium cell battery.
    Includes:
    Transmitter & Battery

  • SFT900C Long-Range Remote Control Transmitter, Handheld, 900 MHz

    $189.95$209.95

    Model:
    SFT900Cn
    Description:
    The SFT900C series transmitters are FCC Part 15 certified, allowing for quick and cost effective wireless solutions. The transmitter ID is pre-programed to one of more than 8 million possible codes at the factory, providing a very high degree of security. The transmitters’ ABS housing is watertight and very rugged and provides long term reliability. SF900C devices utilize spread spectrum technology, granting them long range, high performance, and freedom from most interference. Power is supplied by a CR123A lithium cell battery.  Also available with external antenna (-XANT suffix) which approximately doubles the range. The graphic overlay can also be customized for button names and logo.  n= the number of buttons, 1 to 10.
    Includes:
    Transmitter & Battery